CH-640 Fuselage Hull - Stage One - Part Two (96 of 198)


[First] [Prev] [Home] [Index] [Next] [Last]


Position the cowling pickkups under the front of the front lower fuselage skins as per drawings. Drill, cleco, remove, clean, prime, and then rivet with A5 SS rivets. I used SS rivets for the entire front of this skin.
Position the cowling pickkups under the front of the front lower fuselage skins as per drawings. Drill, cleco, remove, clean, prime, and then rivet with A5 SS rivets. I used SS rivets for the entire front of this skin.


[First] [Prev] [Home] [Index] [Next] [Last]