CH-640 Fuselage Firewall sub-assembly (6 of 52)


[First] [Prev] [Home] [Index] [Next] [Last]


Clamp, drill, and cleco vertical Z's to firewall. Again, do NOT DRILL bottom (about 40 mm) or center where 20-F-16-1 will overlap. You can drill these areas later after you have installed the rest of the parts and drilled your engine mount holes.
Clamp, drill, and cleco vertical Z's to firewall. Again, do NOT DRILL bottom (about 40 mm) or center where 20-F-16-1 will overlap. You can drill these areas later after you have installed the rest of the parts and drilled your engine mount holes.


[First] [Prev] [Home] [Index] [Next] [Last]